Toyota Sienna Service Manual: Terminals of ECU
1. MULTIPLEX NETWORK GATEWAY ECU
- Disconnect the G4 ECU connector.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
2. MULTIPLEX NETWORK BODY ECU
- Disconnect the B7 ECU, 1A, 1C, 1E, 1K and 1L junction block connectors
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector
If the result is not as specified, there may be a malfunction on the wire harness side.
3. AIRBAG SENSOR ASSEMBLY
- Disconnect the A21 ECU connector.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
4. SEAT POSITION CONTROL ECU (with Driving Position Memory)
- Disconnect the P58 and P59 ECU connectors.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
5. AIR CONDITIONING AMPLIFIER
- Disconnect the A9 ECU connector.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
HINT:
*1: for Automatic A/C
*2: for Manual A/C
If the result is not as specified, there may be a malfunction on the wire harness side.
6. COMBINATION METER
- Disconnect the C10 ECU connector.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
7. POWER SLIDE DOOR ECU RH
- Disconnect the P27 and P28 ECU connectors.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
8. POWER SLIDE DOOR ECU LH
- Disconnect the P25 and P26 ECU connectors.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
9. POWER BACK DOOR ECU
- Disconnect the P13 and P14 ECU connectors.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
10. OUTER MIRROR CONTROL ECU RH (with Driving Position Memory)
- Disconnect the O11 ECU connector.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
11. OUTER MIRROR CONTROL ECU LH (with Driving Position Memory)
- Disconnect the O9 ECU connector.
- Measure the voltage between the specified terminals on the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
- Measure the resistance between the specified terminals on the wire harness side connector
If the result is not as specified, there may be a malfunction on the wire harness side.
How to proceed with
troubleshooting
HINT:
Troubleshoot in accordance with the procedures on the
following pages.
1 VEHICLE BROUGHT TO WORKSHOP
2 DTC CHECK
Check for DTCs and make a note of the code that is
output (See page MP- ...
DTC check / clear
1. CHECK DTC
Prepare the intelligent tester.
Connect the intelligent tester to DLC3.
Turn the ignition switch to the ON position and turn
the intelligent tester main switch ON.
Use the i ...
Other materials:
Reassembly
1. INSTALL SHOCK ABSORBER ASSEMBLY FRONT LH
2. INSTALL FRONT COIL SPRING INSULATOR LOWER
LH
(a) Install the front coil spring insulator lower LH onto
the shock absorber assembly front LH.
3. INSTALL FRONT SPRING BUMPER LH
(a) Install the front spring bumper LH to the piston rod.
4. INSTALL FR ...
Fuel Receiver Gauge Malfunction
DESCRIPTION
The meter CPU uses the fuel sender gauge assembly to determine the level of
the fuel in the fuel tank.
The resistance of the fuel sender gauge will vary between approximately 15 Ω
with the float at the full
position, and 410 Ω with the float at the empty position. The ...
Problem symptoms table
POWER WINDOW CONTROL SYSTEM (W/ JAM PROTECTION)
Symptom
Suspected Area
AUTO UP/DOWN function does not operate
Power window regulator motor assembly (Driver side)
Wire harness
Power window regulator master switch assembly
Remote ...
