Toyota Sienna 2010-2024 Owners Manual: Things you should know
If you notice any symptoms
If you notice any of the following symptoms, refer to the likely cause
and the solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle
inspected by your Toyota dealer.
Likely cause |
Solution |
- The image is difficult to see
|
- The vehicle is in a dark area
- The temperature around the lens
is either high or low
- The outside temperature is low
- There are water droplets on the
camera
- It is raining or humid
- Foreign matter (mud etc.) is
adhering to the camera
- There are scratches on the camera
- Sunlight or headlights are shining
directly into the camera
- The vehicle is under fluorescent
lights, sodium lights, mercury
lights, etc.
|
If this happens due to these causes,
it does not indicate a malfunction.
Back up while visually checking the vehicle’s surroundings. (Use the
monitor again once conditions have been improved.) The image on the rear
view monitor system can be adjusted. |
|
Dirt or foreign matter (such as water
droplets, snow, mud, etc.) is adhering
to the camera |
Flush the camera with a large quantity
of water and wipe the camera
lens clean with a soft and wet cloth. |
- The image is out of alignment
|
The camera or surrounding area has
received a strong impact |
Have the vehicle inspected by your
Toyota dealer. |
- The fixed guide lines are very far out of alignment
|
The camera position is out of alignment. |
Have the vehicle inspected by your
Toyota dealer |
- The vehicle is tilted (there is a
heavy load on the vehicle, tire
pressure is low due to a tire puncture,
etc.)
- The vehicle is used on an incline.
|
If this happens due to these causes,
it does not indicate a malfunction.
Back up while visually checking the
vehicle’s surroundings. |
WARNING When using the rear view monitor system
The rear view monitor system is a supplemental device intended to
assist
the driver when backing up. When backing up, be sure to check visually
behind and all around the vehicle before proceeding.
Observe the following precautions to avoid an accident that could result
in
death or serious injuries.
- Never depend on the rear view monitor system entirely when
backing up.
The image and the position of the guide lines displayed on the
screen may
differ from the actual state.
Use caution, just as you would when backing up any vehicle.
- Be sure to back up slowly, depressing the brake pedal to control
vehicle
speed.
- The instructions given are only guide lines.
When and how much to turn the steering wheel will vary according to
traffic
conditions, road surface conditions, vehicle condition, etc. when
parking.
It is necessary to be fully aware of this before using the rear view
monitor system.
- When parking, be sure to check that the parking space will
accommodate
your vehicle before maneuvering into it.
- Do not use the rear view monitor system in the following cases:
- On icy or slick road surfaces, or in snow
- When using tire chains or the compact spare tire (if
equipped)
- When the back door is not closed completely
- On roads that are not flat or straight, such as curves or
slopes.
- In low temperatures, the screen may darken or the image may
become
faint. The image could distort when the vehicle is moving, or you
may
become unable to see the image on the screen. Be sure to check
direct
visually and with the mirrors all around the vehicle before
proceeding.
- If the tire sizes are changed, the position of the fixation
guide lines displayed
on the screen may change.
- The camera uses a special lens. The distances between objects
and pedestrians that appear in the image displayed on the screen
will differ from the actual distances.
|
NOTICE How to use the camera
- The rear view monitor system may not operate properly in the
following
cases.
- If the back of the vehicle is hit, the position and
mounting angle of the
camera may change.
- As the camera has a water proof construction, do not
detach, disassemble
or modify it. This may cause incorrect operation.
- When cleaning the camera lens, flush the camera with a
large quantity
of water and wipe it with a soft and wet cloth. Strongly rubbing the
camera
lens may cause the camera lens to be scratched and unable to
transmit a clear image.
- Do not allow organic solvent, car wax, window cleaner or
glass coat to
adhere to the camera. If this happens, wipe it off as soon as
possible.
- If the temperature changes rapidly, such as when hot water
is poured
on the vehicle in cold weather, the system may not operate normally.
- When washing the vehicle, do not apply intensive bursts of
water to the
camera or camera area. Doing so may result in the camera
malfunctioning.
|
Area displayed on screen
The rear view monitor system
displays an image of the view
from the bumper of the rear
area of the vehicle.
The image on the rear view monitor system can be adjusted.
...
To help enhance driving safety and performance, the following
systems operate automatically in response to various driving
situations. Be aware, however, that these systems are supplementary
and sh ...
Other materials:
Installation
1. REMOVE FRONT SEAT INNER BELT ASSEMBLY
HINT:
Refer to the instructions for reassembly of the front seat assembly
(for flat type).
Refer to the instructions for reassembly of the front seat assembly
(for manual seat).
Refer to the instructions for reassembly of the ...
Setup menu
You can adjust the audio system to your desired settings.
Display “Setup” screen
Press the “SETUP” button to display the “Setup” screen.
Select to adjust the settings for operation sounds, screen animation,
etc.
Select to set the voice settings.
Select to adjust th ...
Abbreviations used in manual
...