Toyota Sienna Service Manual: Slide door

Reassembly

1. INSTALL FRONT DOOR WIRE LH Install the wire with the 2 bolts. Torque: Reference 8.0 N*m (82 kgf*cm, 71 in.*lbf) NOTICE: In order to prevent water leakage, be sure that the lip of t ...

Removal

HINT: On the RH side, use the same procedures as on the LH side. 1. REMOVE SLIDE DOOR Remove the rear door scuff plate (See page IR-7). Remove the back door scuff plate (See page ED- 214 ...

Other materials:

Canceling and resuming the speed control
Pulling the lever toward you cancels the cruise control. The speed setting is also canceled when the brakes are applied. Pushing the lever up resumes the cruise control and returns vehicle speed to the set speed. Resuming is available when the vehicle speed is more than approxi ...

Disassembly
1. FIX FRONT SHOCK ABSORBER WITH COIL SPRING (a) Install 2 nuts and a bolt to the bracket at the lower side of the front shock absorber with coil spring and secure it in a vise. 2. REMOVE FRONT SUSPENSION SUPPORT SUBASSEMBLY LH (a) Using SST, compress the front coil spring LH SST 09727-300 ...

Rear Room Temperature Sensor Circuit
DESCRIPTION This sensor detects the rear cabin temperature that is used as the basis for temperature control and sends a signal to the A/C amplifier. WIRING DIAGRAM INSPECTION PROCEDURE 1 READ VALUE OF INTELLIGENT TESTER (a) Connect the intelligent tester to the DLC3. (b) Turn the ign ...